INDUSTRIAL FLOW METER

F56/P10A VA Flow meter

Variable Flow Meter

Transmitter with Local LCD Indicator is designed on the basis of PCB multifunction flow, the signal measured is converted to flow value by magnetic coupling. The value is both shown by the pointer on the
scale plate and on LCD.

สอบถาม / ขอใบเสนอราคา ติดต่อฝ่ายขาย

หมวดหมู่: Flow Meter, Metal Tube, Rotameter

แบรนด์: BABI

Overview

BABI F56/P10A VA Flow Meter เครื่องวัดอัตราการไหลแบบ Variable Area พร้อมจอแสดงผล เหมาะสำหรับงานวัดและควบคุมการไหลในโรงงาน

Features

Made of stainless steel stainless steel by stamping forming.
Local instantaneous flow indicated by mechanical pointer.
Instantaneous flow, accumulated flow and percentile flow indicated on LCD.
Two wire system 4-20mA, Hart Protocol Digital communication.
Parameter setting by full function key, HART communicator and PC.
IS (intrinsically safe)/ Flameproof function.
Electrical connection part connected by M12 plug-and-play aviation plug.

P10 Indicator:

Modularization design Exi, Exd explosion protection housing
2-wire electrical signal output (4-20)mA/HART
Optional limit alarm

Specifications

GENERAL SPECIFICATION

Technical Data

Type	F56
Medium	Liquids, gases, vapors
Rang(conversion to 100% value of reference fluid )	Water : 20℃		(10-300000)L/h , Special order on request:
	Air : 0.1013MPa, 20℃		(0.7-3000)Nm³/h, Special order on request:
The turn-down ratio	10 : 1
Accuracy class	Mechanical indicator			1.0, 1.5, 2.0, 2.5
	Mechanical indicator with LCD（battery powered, service life: 2 years）			1.0, 1.5, 2.0, 2.5
	Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol			1.0, 1.5, 2.0, 2.5
Medium temperature	Machinery indicator with LCD（battery powered, service life: 2 years）			-80℃~+300℃ (PTFE:0~80℃) High temperature 400℃
	Mechanical indicator（battery powered, service life : 2 years）			-40℃~+120℃ (PTFE:0~80℃) High temperature 400℃
	Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol			-40℃~+120℃ (PTFE:0~80℃) High temperature 400℃
Ambient temperature	Mechanical indicator			-40℃~+120℃
	Mechanical indicator with LCD（battery powered, service life: 2 years）			-20℃~+60℃
	Mechanical indicator with two-wire signal output (4-20)mA/hart communication			-20℃~+60℃
Viscosity of fluid	DN15: F15.00~F15.03 η<5 mPa.s, F15.04~15.30 η<30 mPa.s; DN25: η<250 mPa.s; DN50~250: η<300 mPa.s
Nominal pressure	DN15~DN50	4.0MPa（Max DN15: 42MPa, DN25: 42MPa, DN50: 32MPa）
	DN80~DN250	1.6MPa（Max DN80: 10MPa, DN100: 6.4MPa, DN125: 4.0MPa， DN150: 4.0MPa, DN200: 2.5MPa, DN250: 2.5Mpa）
Process connection	Flange connection, Standard: DIN2501, ANSI, JIS（select Chinese standard freely, priority select DIN）
	Hygiene clamp, screw joint are selected in the order
Electrical connection	M20×1.5 1/2″G 1/2″NPT 3/4″G 3/4″NPT
Installation	Vertical installataion（bottom in up out and up in bottom out, Horizontal installataion（left in right out and right in left out） bottom in side out, side in side out
Straight unimpeded inlet run	≥ 5D
Straight unimpeded outlet run	≥ 250 mm
Degree of protection	IP67(Others need specify in the order)
Ex marking	EEx ia II CT5
	EEx d II CT6
Ex electrical data	Ui = 28V Ii = 93mA Pi = 0.65W Ci ≤ 5nF Li =0mH
Safety barrier data	Uo ≤ 28V Io ≤ 93mA Po ≤ 0.65W Co ≥ Ci+Cc Lo ≥ Li+Lc
Carried Standard	JB/T 6844-93