F56/P8L
Variable Flowmeter
Transmitter with Local LCD Indicator is designed on the basis of PCB multifunction flow, the signal measured is converted to flow value by magnetic coupling. The value is both shown by the pointer on the
scale plate and on LCD.
P8 Mechanical indicator:
- Stainless steel housing, punch forming, surface polished.
- Flow read by local mechanical pointer
- Compact and beautiful structure.
Overview
BABI F56/P8L Variable Flow Meter โรตามิเตอร์ท่อโลหะ พร้อม Mechanical Indicator สำหรับแสดงอัตราการไหล เหมาะสำหรับงานอุตสาหกรรม
Features
- Designed for food industry.
- Easy to disassemble, clean and maintain.
- Housing made of stainless steel, corrosion resistant.
- Indicator made of stainless steel by stamping forming, surface polished, beautifuland compact structure.
- Local display indicator and local display with transmitter indicator are optional tomeet a variety of control requirements.
- Varieties of nominal diameter are available up to DIN3276（I SO2852, ASME andso on).\
- Standard clamp connection.
Specifications
| Type | F56 | |||
| Medium | Liquids, gases, vapors | |||
| Rang(conversion to 100% value of reference fluid ) | Water : 20℃ | (10-300000)L/h , Special order on request: | ||
| Air : 0.1013MPa, 20℃ | (0.7-3000)Nm3/h, Special order on request: | |||
| The turn-down ratio | 10 : 1 | |||
| Accuracy class | Mechanical indicator | 1.0, 1.5, 2.0, 2.5 | ||
| Mechanical indicator with LCD（battery powered, service life: 2 years） | 1.0, 1.5, 2.0, 2.5 | |||
| Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol | 1.0, 1.5, 2.0, 2.5 | |||
| Medium temperature | Machinery indicator with LCD（battery powered, service life: 2 years） | -80℃~+300℃ (PTFE:0~80℃)
High temperature 400℃ |
||
| Mechanical indicator（battery powered, service life : 2 years） | -40℃~+120℃ (PTFE:0~80℃)
High temperature 400℃ |
|||
| Mechanical indicator with two-wire signal output (4-20)mA/hart communication protocol | -40℃~+120℃ (PTFE:0~80℃)
High temperature 400℃ |
|||
| Ambient temperature | Mechanical indicator | -40℃~+120℃ | ||
| Mechanical indicator with LCD（battery powered, service life: 2 years） | -20℃~+60℃ | |||
| Mechanical indicator with two-wire signal output (4-20)mA/hart communication | -20℃~+60℃ | |||
| Viscosity of fluid | DN15: F15.00~F15.03 η<5 mPa.s, F15.04~15.30 η<30 mPa.s; DN25: η<250 mPa.s; DN50~250: η<300 mPa.s | |||
| Nominal pressure | DN15~DN50 | 4.0MPa（Max DN15: 42MPa, DN25: 42MPa, DN50: 32MPa） | ||
| DN80~DN250 | 1.6MPa（Max DN80: 10MPa, DN100: 6.4MPa, DN125: 4.0MPa，
DN150: 4.0MPa, DN200: 2.5MPa, DN250: 2.5Mpa） |
|||
| Process connection | Flange connection, Standard: DIN2501, ANSI, JIS（select Chinese standard freely, priority select DIN） | |||
| Hygiene clamp, screw joint are selected in the order | ||||
| Electrical connection | M20×1.5 1/2″G 1/2″NPT 3/4″G 3/4″NPT | |||
| Installation | Vertical installataion（bottom in up out and up in bottom out, Horizontal installataion（left in right out and right in left out）
bottom in side out, side in side out |
|||
| Straight unimpeded inlet run | ≥ 5D | |||
| Straight unimpeded outlet run | ≥ 250 mm | |||
| Degree of protection | IP67(Others need specify in the order) | |||
| Ex marking | EEx ia II CT5 | |||
| EEx d II CT6 | ||||
| Ex electrical data | Ui = 28V Ii = 93mA Pi = 0.65W Ci ≤ 5nF Li =0mH | |||
| Safety barrier data | Uo ≤ 28V Io ≤ 93mA Po ≤ 0.65W Co ≥ Ci+Cc Lo ≥ Li+Lc | |||
| Carried Standard | JB/T 6844-93 | |||
Downloads
สนใจสินค้า หรือขอใบเสนอราคา
แจ้งรุ่นสินค้าและรายละเอียดการใช้งาน เพื่อให้ทีมงานช่วยเลือก Flow Meter ที่เหมาะสม
F56/P8L
Variable Flowmeter
Transmitter with Local LCD Indicator is designed on the basis of PCB multifunction flow, the signal measured is converted to flow value by magnetic coupling. The value is both shown by the pointer on the
scale plate and on LCD.
P8 Mechanical indicator:
- Stainless steel housing, punch forming, surface polished.
- Flow read by local mechanical pointer
- Compact and beautiful structure.
