INDUSTRIAL FLOW METER

ACF6010 Series

The ACF6010 Series uses the Coriolis effect as a technique for mass flow measurement of the fluid. It can also directly measure the density and temperature.
The ACF6010 can be used for liquids and gases; the infrared keypad makes it easy for you to set parameters & change the display data in hazardous environments. The Double-V tube and Double-U tube design make it possible for the meter to be used in most fluid applications.

สอบถาม / ขอใบเสนอราคา ติดต่อฝ่ายขาย

หมวดหมู่: Coriolis flow meter, Flow Meter

แบรนด์: ALIA

Overview

Coriolis Flow Meter with Density Measurement ACF6010 สำหรับวัด Mass Flow, Density และ Temperature เหมาะกับงาน Process Industry

Features

Can be programmed by the infrared keypad without opening the cover
High turndown ratio of flow rate
Multiple flange types are available, such as ANSI, DIN, JIS, etc.
Excellent for high-pressure applications
Simple for installation, commission and maintenance
Self-diagnostic capabilities, cable faults, pipe vibration
High accuracy of +/-0.2% of reading (or +/-0.1% of reading)
With forward / reverse flow rate measurement function
Large-screen LCD display for easy viewing and operation on-site

Applications

Flow measurement of liquids, gases, and steam using differential pressure primary elements.
Compatible with Orifice Plates, Venturi Tubes, Flow Nozzles, Pitot Tubes, Annubar®, and V-Cone flow elements.
Steam flow monitoring in power plants and industrial boiler systems.
Natural gas and compressed air flow measurement.
Process flow monitoring in chemical and petrochemical industries.
Water and wastewater flow measurement.
Cooling water and hot water flow monitoring in utility systems.
Fuel gas and combustion air flow measurement for burner management systems.
Flow measurement in food & beverage and pharmaceutical processes.
Custody transfer and process control applications requiring high measurement accuracy.
Integration with PLC, DCS, and SCADA systems via 4–20 mA and HART communication.
Suitable for continuous industrial process monitoring in hazardous and non-hazardous areas.

Specifications

ensor Type	:	U tube (2-40 mm) / V tube (50-150 mm)
Size	:	2-150 mm (1/12″-6″)
Flow Range	:	0-160 kg/hr~0-580000 kg/hr
Accuracy	:	+/-0.2% +/-ZS of reading (Standard)
	:	+/-0.1% +/-ZS of reading (Option)
Repeatability	:	+/-0.03% +/-ZS of reading
Density Range	:	200-3000 kgf/m³ (0.2-3.0 g/cm³)
Accuracy	:	+/-0.002 g/cm³
Temperature Range	:	-50~125 °C (Standard)
	:	-50~350 °C (Option, Remote Only)
Ambient Temperature	:	-40~60 °C
Max. Pressure	:	100 kgf/cm²
Material
Wetted Parts & Flange	:	S.S. 316L, Hastelloy C22
Sensor Housing	:	Stainless Steel 304
Junction Box	:	Aluminum Alloy (Epoxy Paint)
Process Connection	:	Flange
Flange Type	:	JIS 10K / JIS 20K / JIS 40K
	:	ANSI 150# / ANSI 300# / ANSI 600#
	:	DIN PN10 / PN16 / PN25 / PN40
Protection Class	:	IP67
	:	Explosion Proof, Ex d eb [ib] IIC T6 (Option)
Signal Cable Length	:	10-150 m

Display	:	4 lines LCD with illumination
Flow Rate Unit	:	g/s, kg/m, kg/hr, t/hr, lb/m, gal/m… (8 Digits)
Density Unit	:	kg/m³, g/cm³, lb/Usgal (5 Digits)
Totalizer Unit	:	g,kg,T,L,m³,Nm³,lb,gal,lb,ft³…(11 Digits)
Temperature	:	°C, °F (6 Digits)
Keypad	:	Infrared light sensor, can be programmed
		without opening the cover
Turndown Ratio	:	40:1
Damping	:	0.0-1.0 Seconds
Low Flow Cutoff	:	0.0-3600 t/hr and 0.0-3,600,000 m³/hr
Communication	:	RS485 (Modbus Protocol) (Standard)
	:	HART Signal (Option)
Current Output	:	4-20 mA(Isolated), Max. 2 channels(Option)
Load	:	Max. 550 W
Output Unit	:	Mass / Volume / Density / Temperature
Pulse Output	:	Active Pulse (Open Collector)
Rating	:	24 VDC, 50 mA Max.
Display Orientation	:	0° or 180° (Parameter Setting)
Power Supply	:	90-260 VAC, 50/60 Hz or 24 VDC +/-10%
Power Consumption	:	7-13 W
Cable Entry	:	Sensor to Converter-3/4″ G
	:	Signal Output / Power Supply-M20
Installation	:	Compact or Remote